Dr. Joanna Wong
Positions
Assistant Professor
Schulich School of Engineering, Department of Mechanical and Manufacturing Engineering
Associate Head (Graduate Studies)
Schulich School of Engineering, Department of Mechanical and Manufacturing Engineering
Contact information
Web presence
Phone number
Office: 403.220.5918
Location
Office: MEB220
For media enquiries, contact
Joe McFarland
Media Relations and Communications Specialist
Cell: +1.403.671.2710
Email: Joe.Mcfarland@ucalgary.ca
Background
Credentials
P.Eng, APEGA,
Educational Background
BASc Engineering Science - Nanoengineering, University of Toronto, 2005
Dr.sc.ETH Mechanical and Process Engineering, Swiss Federal Institute of Technology (ETH), 2011
MSc Microelectromechanical Systems (MEMS), Ecole Superieure d'Ingenieurs en Electronique et Electrotechnique, 2007
MSc Microelectromechanical Systems (MEMS), Nanyang Technological University, 2007
Biography
Joanna Wong has been an assistant professor in the Department of Mechanical and Manufacturing Engineering at the University of Calgary since July 2017.
Her research focuses on developing materials and cost-effective processes for specific engineering applications. In the past, this has included fibre-reinforced thermoplastic composites for automotive applications, superhydrophobic and omniphonic coatings for water management, silica aerogels for building insulation, ferroelectrets for sensors and actuators, sputtering processes for semiconductor devices, and molecular storage devices. Currently, her research is on developing different manufacturing processes for fibre-reinforced thermoplastic composites such as additive manufacturing, pultrusion, filament winding, and stamp forming.
Research
Areas of Research
- Advanced materials
- Composite materials
- Nanomaterials
- Materials engineering
- Biologically sourced materials
- Smart materials
- Multifunctional materials
- Additive manufacturing
- Composite processing
Participation in university strategic initiatives
Courses
| Course number | Course title | Semester |
|---|---|---|
| ENME 421 | Materials I | Winter 2022 |
| ENMF 619.03 | Spec Problems Manufact Engg | Fall 2021 |
Publications
- Exploiting cyclic softening in continuous lattice fabrication for the additive manufacturing of high performance fibre-reinforced thermoplastic composite materials. Joanna Wong; Martin Eichenhofer; Paolo Ermanni. (2018)
- Filament winding of aramid/PA6 commingled yarns with in situ consolidation. Joanna Wong; Javier Molina Blanco; Paolo Ermanni. (2018)
- Continuous lattice fabrication of ultra-lightweight composite structures. Joanna Wong; Paolo Ermanni; Martin Eichenhofer. (2017)
- Hybrid bicomponent fibres for thermoplastic composite preforms. Paolo Ermanni; Joanna Wong; Christoph Schneeberger. (2017)
- C-78 cage isomerism defined by trimetallic nitride cluster size: A computational and vibrational spectroscopic study. Joanna Wong; Matthias Krause; Shangfeng Yang; Alexey A Popov; Lothar Dunsch. (2007)
- Drawing suspended polymer micro-/nanofibers using glass micropipettes. Joanna Wong; Cristina Amon; Metin Sitti; Amrinder Nain. (2006)
- The electronic and vibrational structure of endohedral Tm3N@C-80 (I) fullerene - Proof of an encaged Tm3+. Lorthar Dunsch; Mathias Krause; Xianjie Liu; Martin Knupfer; Thomas Pichler; Joanna Wong. (2005)
- Electronic structures of the pristine and K-intercalated Tm3N@C-80 endohedral fullerenes. M Knupfer; L Dunsch; J Wong; X Liu; M Krause; T Pichler. (2005)
- Expanding the world of endohedral fullerenes - The Tm3N@C-2n (39 <= n <= 43) clusterfullerene family. Joanna Wong; Matthias Krause; Lothar Dunsch. (2005)
- Pultrusion process optimization in continuous lattice fabrication: A non-isothermal, non-Newtonian pultrusion model for commingled yarns. Joanna Wong; Shelly Arreguin; Martin Eichenhofer. (2019)
- Mechanical and thermal properties of nanobrillated cellulose reinforced silica aerogel composites. Mathias Koebel; Philip Tingaut; Samuel Brunner; Joanna Wong; Hicret Kaymak. (2015)
- Mechanical properties of monolithic silica aerogels made from polyethoxydisiloxanes. Matthias M. Koebel; Hicret Kaymak; Samuel Brunner; Joanna Wong. (2014)
- Macroporous polymers from particle-stabilized emulsions. Joanna Wong; Elena Tervoort; Ilke Akartuna; Andre R. Studart; Ludwig J. Gauckler. (2009)
- Engineering macroporous composite materials using competitive adsorption in particle-stabilized foams. Elena Tervoort; Ludwig J. Gauckler; Stephan Busato; Paolo Ermanni; Joanna Wong. (2012)
- Designing macroporous polymers from particle-stabilized foams. Urs T. Gonzenbach; Paolo Ermanni; Stephan Busato; Joanna Wong; Andre R. Studart; Elena Tervoort; Ludwig J. Gauckler. (2010)
- Macroporous polymers from particle-stabilized foams. Ludwig J. Gauckler; Joanna Wong; Elena Tervoort; Andre R. Studart; Urs T. Gonzenbach; Stephan Busato; Paolo Ermanni. (2009)
- Thermoplastic composite materials for high voltage insulator applications. Shelly Arreguin; Frank Schmuck; Paolo Ermanni; Max Volk; Joanna Wong; Christiane Baer. (2019)
- A scalable process for making hybrid bicomponent fibers for the efficient manufacturing of thermoplastic composites. Joanna Wong; Christoph Schneeberger; Nicole Aegerter; Paolo Ermanni; Shelly Arreguin. 131-134. (2018)
- Optimizing the Thermoplastic Welding Propertiesin an FRPC Additive Manufacturing Process. Martin Eichenhofer; Paolo Ermanni; Joanna Wong; Shelly Arreguin. 48 - 52. (2018)
- Empirical optimization of kiss roll coating for high-speed bicomponent fibre production. Nicole Aegerter; Paolo Ermanni; Joanna Wong; Christoph Schneeberger. (2017)
- Manufacturing of Hybrid Bicomponent Fibers by Kiss-Roll Coating. Paolo Ermanni; Nicole Aegerter; Joanna Wong; Christoph Schneeberger. (2017)
- A method for dispersing particle fillers in thermoplastic composites using commingled yarns. Paolo Ermanni; Nadine Hertaeg; Joanna Wong. (2017)
- Experimental Investigation of Processing Parameters on Porosity in Continuous Lattice Fabrication. Martin Eichenhofer; Joanna Wong; Paolo Ermanni. (2017)
- The development of particle-stabilized polymer foams for potential passive and active damping applications. Ludwig J Gauckler; Joanna Wong; Stephan Busato; Paolo Ermanni; Elena Tervoort; Andre R Studart; Urs T Gonzenbach. (2008)
- Bicomponent polymer/glass Fibres for stamp forming. Joanna Wong; Christoph Schneeberger; Paolo Ermanni. (2016)
- Manufacturing of Bicomponent Fibres for Thermoplastic Composites: A Feasibility Study. Joanna Wong; Christoph Schneeberger; Paolo Ermanni. (2016)
- The characterization of porous materials from particle-stabilized liquid foams as piezoelectric space-charge electrets. Paolo Ermanni; Elena Tervoort; Stephan Busato; Urs Gonzenbach; Ludwig Gauckler; Joanna Wong; Andre Studart. (2009)
- Bicomponent Fibres for Thermoplastic Composites: Concept and Manufacturing. Christoph Schneeberger; Paolo Ermanni; Joanna Wong. (2016)
- Piezoelectric Polymeric Electrets from PVDF Particle-stabilized Foams. Paolo Ermanni; Joanna Wong; Andre R Studart; Urs T Gonzenbach; Ludwig J Gauckler; Stephan Busato; Elena Tervoort. (2009)
- PVDF Particle-stabilized Polymeric Foams as Piezoelectric Space-charge Electrets. Urs T Gonzenbach; Stephan Busato; Paolo Ermanni; Elena Tervoort; Joanna Wong; Andre R Studart; Ludwig J Gauckler. (2009)
Are you the profile owner?
Login to edit.